3DMonstr Specifications





Quick Specs Summary
Entire Family of 3D Monstr Printers
Architecture Folding Gantry style 3D printer
# Extruders Each printer can house up to 4 independent extruders
Body Aluminum U-Chanel, custom machined connector blocks
Best Print Layer Resolution 40 micron
Top Print Speed 110 mm/s
Heated Bed Yes. Includes indepedently controllable zones.
Extruder Cooling System Liquid Cooling
Bed Leveling Auto Leveling
 
Build Volume of 3DMonstr 3D Printers
  T-Rex-12 T-Rex-18 T-Rex-24
Inches 12" x 12" x 12" 18" x 18" x 18" 24" x 24" x 24"
Cubic Inches 1,728 cu in 5,838 cu in 13,824 cu in
Cubic Feet 1 cu ft 3.375 cu ft 8 cu ft
 
Size and Weight
  T-Rex-12 T-Rex-18 T-Rex-24
Build volume (inches) 12" x 12" x 12" 18" x 18" x 18" 24" x 24" x 24"
Build volume (cubic inches) 1,728 cu in 5,838 cu in 13,824 cu in
Build volume (cubic feet) 1 cu ft 3.375 cu ft 8 cu ft
Top Piece (Gantry) - w/out extruder plate 22"L x 24"W x 5"H 28"L x 30"W x 5"H 34"L x 36"W x 5"H
Bottom Piece (Table) 20"L x 19"W x 5"H 26"L x 25"W x 5"H 32"L x 31"W x 5"H
Total Size Folded Flat 35"L x 24"W x 6"H 44"L x 30"W x 6"H 53"L x 36"W x 6"H
Total Size Standing Up 20"L x 24"W x 25"H 26"L x 30"W x 31"H 34"L x 36"W x 37"H
Weight 75 lbs 100 lbs 150 lbs
Folds flat for easy transport Yes Yes Yes
 
Mechanics
Architecture Folding Gantry style 3D printer
Body Aluminum U-Channel, custom machined connector blocks
Machine Leveling Adjustable legs & a built-in 2-axis bubble level
Best Print Layer Resolution 40 micron
Top Print Speed 110 mm/s
XYZ Drive Ballscrew with anti-backlash ballnut
XYZ Bearings Linear ball bearing on 16mm ground rods
XY Motors 3.5Amp NEMA23 @ 270 oz-in torque
Z Motors 1.5Amp NEMA17 @ 72 oz-in torque
 
Homing Fully adjustable in X, Y, and Z. Tested at the factory.
Calibration Pre-calibrated at the factory
 
Build platform Borosilicate glass plate, easy to remove, heat pad
Extruder Z-height Each extruder is fully adjustable via QuickMount
Mechanical Extruder Interface Will publish under Open Hardware license
 
Electrical/Electronic
Power Requirements 110V 60hz
Power supply Built-in 24V @ 15Amp and 48V @ 8Amp
Network Connectivity WiFi upgrade in the future
Computer connection USB
Electronics Custom Main and Heater controllers, custom motor drives for X & Y
Mechanical & Electrical Extruder Interface Will publish under Open Hardware license
Cabling Hidden in the frame
Connectors Power, USB, Interface to extruders, interface btwn Gantry & Table
Electronics Access Easy acces via easily removed covers
Power Compatibility Compatible w/ mains power in US, Canada, EU, ANZAC & others
 
Software
System compatibility Windows XP, Vista, 7, Linux, MacOS X
Ships with Opensource software:  
------- Host Interface Repetier (includes Slic3R and Cura slicers)
------- Firmware Pre-configured customized Repetier
Chip to test the G-Code Yes
 
Little Titan-Filament Extruder
Summary Super Compact/light weight (1.5" wide, 350g all up)
Mount Pin&magnet attachment. Individually adjustable QuickMount
# Extruders Minimum 2, Maximum 4
Filament Type PLA, ABS, HIPS, PVA, Nylon, PET, NinjaFlex, Paraffin wax
Filament Diameter 1.75mm, 3mm (future)
Nozzle Diameter Choices: .35, .4, .46, 5, .6, .8 mm
Cooling System Liquid Cooling
 
Designed and Manufactured in NJ
v-2016-02-01